Home > 製品情報 > series > 直流電子負荷
IT8500+ Programmable DC Electronic Load

IT8500+series (150W~3000W) single-channel programmable DC electronic loads are designed for middle & high-end applications.They can be offered as multiple solutions according to customer's design and testing requirements.The user can perform online voltage measurements and adjustments or simulate short circuit test using the simple keypad on the front panel. IT8500+ series DC loads are a versatile instrument for static and dynamic testing of power supplies,batteries,DC - DC converters,battery chargers,provides user the best testing solution.


製品を探す
型名
電圧
電流
電力
分解能
精度
インターフェース
サイズ
IT8513B+
500V
30A
600W
1mV/1mA
0.02%+0.025 %FS/0.1%+0.1%FS
RS232/USB/RS485
½ 2U
お問い合わせ
IT8513C+
120V
120A
600W
0.1mV/1mA
±(0.025%+0.025%FS)/ ±(0.05%+0.05%FS)
RS232/USB/RS485
½ 2U
お問い合わせ
IT8514B+
500V
60A
1500W
0.1mV/1mA
±(0.025%+0.025%FS)/ ±(0.05%+0.05%FS)
RS232/USB/RS485
2U
お問い合わせ
IT8514C+
120V
240A
1500W
1mV/0.1mA
±(0.025%+0.025%FS)/ ±(0.05%+0.05%FS)
RS232/USB/RS485
2U
お問い合わせ
IT8516C+
120V
240A
3000W
0.1mV/1mA
±(0.025%+0.025%FS)/ ±(0.1%+0.1%FS)
RS232/USB/RS485
4U
お問い合わせ
IT8511A+
150V
30A
150W
0.1mV/1mA
±(0.025%+0.025%FS)/ ±(0.05%+0.05%FS)
RS232/USB/RS485
½ 2U
お問い合わせ
IT8511B+
500V
10A
150W
1mV/0.1mA
±(0.025%+0.025%FS)/ ±(0.05%+0.05%FS)
RS232/USB/RS485
½ 2U
お問い合わせ
IT8512A+
150V
30A
300W
1mV/0.1mA
±(0.025%+0.025%FS)/ ±(0.05%+0.05%FS)
RS232/USB/RS485
½ 2U
お問い合わせ
IT8512B+
500V
15A
300W
1mV/0.1mA
±(0.025%+0.025%FS)/ ±(0.05%+0.05%FS)
RS232/USB/RS485
½ 2U
お問い合わせ
IT8512C+
120V
60A
300W
1mV/0.1mA
±(0.025%+0.025%FS)/ ±(0.05%+0.05%FS)
RS232/USB/RS485
½ 2U
お問い合わせ
IT8512H+
800V
5A
300W
1mV/0.1mA
±(0.025%+0.025%FS)/ ±(0.05%+0.05%FS)
RS232/USB/RS485
½ 2U
お問い合わせ
IT8513A+
150V
60A
400W
0.1mV/1mA
±(0.025%+0.025%FS)/ ±(0.05%+0.05%FS)
RS232/USB/RS485
½ 2U
お問い合わせ
Show all
* The above specifications are subject to change without prior notice.
製品特性

Features

♦ Four operating modes: CV,CC,CR,CP
♦ Battery test function, automatic test function, OPP test, OCP test function and CR-LED function.
♦ Dynamic mode up to 10KHz
♦ Voltage measurement resolution up to 0.1mV / 0.1mA
♦ Remote sense
♦ Short circuit function
♦ Current monitoring function
♦ Power-off memory function
♦ 100 groups memory capacity
♦ Optional USB / RS232 / RS485 interface

* IT8514B+, IT8514C+ and IT8516C+ have built-in RS232 and USB interfaces.


機能及び特徴

Dynamic test function

The dynamic test operation allows the electronic load to be switched between the two setting parameters according to the setting rules. This function is used to test the dynamic characteristics of the power supply.

♦ Continuous mode: Under continuous mode, When the dynamic test operation is enabled, load will be continuously switched between the A value and the B value .


♦ Pulse mode: Under pulse mode, when the dynamic test operation is enabled, each receive a trigger signal, the load will switch to the B value, after maintaining the B pulse width time, switch back to the A value.


 Toggle mode: In the trigger mode, when the dynamic test operation is enabled, each time a trigger signal is received, the load is switched between the A value and the B value.


Battery discharge test function

IT8500 + series electronic load can use constant current mode for battery discharge test. After the discharge test mode is selected, the test mode termination condition "switch off voltage value", "switch off capacity value" and "discharge time" can be set. When any of the three conditions is satisfied, the discharge is stopped and the electronic load is automatically switched is OFF state. Users can observe the battery voltage, time and battery discharge capacity during the test process.


アクセサリ
  • IT-E33620-OO (Optional)
    360A/2m/round terminal, a pair...
  • IT-E32410-OO (Optional)
    240A/1m/round terminal, a pair...
  • IT-E32420-OO (Optional)
    240A/2m/round terminal, a pair...
  • IT-E31220-OO (Optional)
    120A/2m/round terminal, a pair...
  • IT-E31220-OO (Optional)
    120A/2m/round terminal, a pair...
  • IT-E30615-OO (Optional)
    60A/1.5m/round terminal, a pai...
  • IT-E30320-YY (Optional)
    30A/2m/Y terminal, a pair of r...
  • IT-E151A (Optional)
    19'' Rack mount kit
  • IT-E151 (Optional)
    19'' Rack mount kit
  • IT-E30110-AB (Optional)
    10A/1m/Alligator clip - Banana...
  • IT-E30110-BB (Optional)
    10A/1m/Banana plug - Banana pl...
  • IT-E30110-BY (Optional)
    10A/1m/Banana plug - Y termina...
  • IT-E30312-YY (Optional)
    30A/1.2m/Y terminal, a pair of...
  • CD (accessory)
    With user manual and communica...
  • AC power cord (accessory)
    AC power cord (accessory)
  • IT-E123 (Optional)
    RS485 optical isolation commun...
  • IT-E122 (Optional)
    USB optical isolation communic...
  • IT-E121 (Optional)
    RS232 optical isolation commun...
  • IT-254 (Optional)
    Cooperate with IT8500+ to comp...
資料センター
Related Products
Relevant Solutions
Related technical articles
関連技術文章
製品カタログ
***Item is required. Please submit the information after completion.
You have submitted it successfully, We will review it as soon as possible.

No Records

More information Product / Solutions