Home > Technical support >Product application articles
 86-25-52415098    www.itechate.com
Find by Product Model Number: FindProduct application articles

Examples:IT6500,IT8800

New member joins in the load with analog control

pdf 0.28MB

The power industry always needs keep cost under control, while offering reliable products. Under these pressure, strict product testing, dynamic application simulation and quality assurance measures are essential. ITECH is deeply aware of the importance of reliability and performance as we have provided the industry with a variety of power supplies and loads, including the brand new high-power density electronic load IT8900A/E which has both the high-performance and cost-effective strengths.

Product application articles

02-07-2018

Application of DC load in the fuse blowing test

pdf 0.51MB

With the promotion of automotive safety, environmental protection, energy saving and comfort, more and more electronics are been used in automobiles. Various types of new connectors and fuses are continuously designed, with higher fuse-breaking capability. By now, the fuses used in the power battery of new energy vehicles are mostly bolt-type fuses, and the nominal current can reach 500A, of which the typical types are SF30 and SF51. Next, we will introduce one way to test the fuse's fuse-time by using ITECH high-power power supply and electronic load.

Product application articles

26-06-2018

Medical Device Measurement - Heart Rate Meter

pdf 0.47MB

For the manufacturers of wearable devices, the challenge is not only making advanced and practical devices to get the love of customers, but also how to minimize the size of wearable devices and keep them long time working. The key to have a long battery life is not only to enlarge the battery’s capacity, but more importantly is the wearable device can save power, which is the most critical problem that need to be settled in the product testing measurement -- the power measurement.

Product application articles

11-12-2017

Why do the IT8300 series provide the best solution for power supply test system?

pdf 0.24MB

For most of the electronic loads, their common problems are they take up too much space, consume a lot of energy, and generate heat and noise. However, ITECH IT8300 Energy-regenerative electronic load solves these issues. This article gives the answers from ITECH manufacturers to the typical questions engineers concerned about, especially related to the advantages of the IT8300.

Product application articles

07-09-2017

Energy-regenerative DC Electronic Load: Cool, quiet, commodious and green

pdf 0.21MB

For many global companies, how to meet production ramps, quality goals and reduce the cost of test is the path to enhance competitiveness. The primary consideration is the cost of equipment, calibration and maintenance. Although the initial investments always command our attention, operating expenses can play a more critical role in total cost of ownership. Managing the total cost can provide a competitive advantage for your business.

Product application articles

06-09-2017

Lithium battery charging

docx 0.27MB

Why Lithium? Compared with the traditional battery, lithium-ion battery charge faster, last longer, and have a higher power density for more battery life in a lighter package. When you know a little about how they work, they can work that much better for you.

Product application articles

07-07-2017

Smart Socket Measurement Assessment Ⅱ

pdf 0.35MB

ITECH star product IT8615 AC/DC electronic load can be used to simulate the working status of different household appliance, and the IT7326 AC power supply can simulate the city AC power supply, and then to test the smart socket from a well-known brand.

Product application articles

04-07-2017

Smart Socket Measurement Assessment Ⅱ

pdf 0.35MB

ITECH star product IT8615 AC/DC electronic load can be used to simulate the working status of different household appliance, and the IT7326 AC power supply can simulate the city AC power supply, and then to test the smart socket from a well-known brand.

Product application articles

04-07-2017

Smart Socket Measurement Assessment Ⅱ

pdf 0.35MB

ITECH star product IT8615 AC/DC electronic load can be used to simulate the working status of different household appliance, and the IT7326 AC power supply can simulate the city AC power supply, and then to test the smart socket from a well-known brand.

Product application articles

04-07-2017

ITECH Solution of LED Driver Test

pdf 0.27MB

In recent years, the LED lighting products have attracted more and more attention due to the low power consumption, long service life, high brightness, low thermal energy, environmentally-friendly performance, durability, rich colors, diverse appearances, stable performance, etc. They are developed from the outdoor to indoor lighting application market. The “high reliability” has become the most important feature of LED products and is directly constrained by the quality of the LED power supply.

Product application articles

03-07-2017

ITECH Electronic Load’s Test On Switching Power Supply

pdf 0.20MB

The electronic load is needed in the early research and development, debugging, testing and final production inspection of the switching power supply. ITECH electronics has been dedicated to the study of related industrial tests with “power electronic” products as the core. The IT8800 series programmable electronic load is one of the star products.

Product application articles

03-07-2017

ITECH evaluation on the SmartSocket

pdf 0.17MB

ITECH select a well-known brand smart socket randomly from the market and test the standby power consumption by IT9121 power meter.

Product application articles

03-07-2017

How to Test The Efficiency of Household Appliance

pdf 0.39MB

The harmonic and power consumption measurements of household appliances are important test items in
research, development and production. The paper focuses on analysis of the role of ITECH IT9121 power meter in two
aspects. When the ITECH IT9121 power meter is used with the IT-E185 measuring fixture box, measurement can be
done more efficiently.

Product application articles

03-07-2017

How to Test The Efficiency of Household Appliance

pdf 0.39MB

The harmonic and power consumption measurements of household appliances are important test items in
research, development and production. The paper focuses on analysis of the role of ITECH IT9121 power meter in two
aspects. When the ITECH IT9121 power meter is used with the IT-E185 measuring fixture box, measurement can be
done more efficiently.

Product application articles

03-07-2017

ITECH Portable Lithium Battery Safety Test Solutions

docx 0.84MB

ITECH IT6412 brings the latest lithium battery safety test solutions. It can safely and efficiently help to test portable and wearable devices’ lithium batteries in all aspects such as tests of recycled charge-discharge, protection functions, battery protection boards and etc.

Product application articles

30-06-2017

How to test LED/ LED driver using AC Power Supply?

pdf 0.20MB

With the increasing global energy shortage and environmental protection requirements in recent years, LED has been widely applied in lighting due to the features of environmental protection, energy conservation and high efficiency, and its service life is concerned. The service life of the LED light mainly depends on the quality of the LED driver power supply. The driver power supply is also critical to the improvement of the LED industry chain and directly affects the reliability of LED products. Therefore, it is essential to improve the LED driver along with gradual progress of the LED industry. The prompt and advanced solution can be provided by the IT7300 series AC power supply of ITECH Electronics (ITECH) for the test of the input end of the LED driver to ensure the accurate and efficient test of the LED driver.

Product application articles

30-06-2017

How to Select Power Supply In The Aerospace Test

pdf 0.41MB

Various kinds of electrical equipment with different functions are jointly applied to ensure the normal operation of the airplane, aircraft, satellite, etc., thereby making contribution to the long-term development of aerospace. The research, development, production and testing of such electrical equipment should be subject to multiple tests, including the reliability test, function test, protective action test, electromagnetic interference test, which mostly depend on the high-precision and high-performance programmable DC power supply. In the aerospace field, the programmable DC power supply is mainly used in testing of DC-DC power supply modules, batteries, flight simulators and other DC electrical equipment.

Product application articles

30-06-2017

How to Select Power Supply In The Aerospace Test

pdf 0.41MB

Various kinds of electrical equipment with different functions are jointly applied to ensure the normal operation of the airplane, aircraft, satellite, etc., thereby making contribution to the long-term development of aerospace. The research, development, production and testing of such electrical equipment should be subject to multiple tests, including the reliability test, function test, protective action test, electromagnetic interference test, which mostly depend on the high-precision and high-performance programmable DC power supply. In the aerospace field, the programmable DC power supply is mainly used in testing of DC-DC power supply modules, batteries, flight simulators and other DC electrical equipment.

Product application articles

30-06-2017

How to Select Power Supply In The Aerospace Test

pdf 0.41MB

Various kinds of electrical equipment with different functions are jointly applied to ensure the normal operation of the airplane, aircraft, satellite, etc., thereby making contribution to the long-term development of aerospace. The research, development, production and testing of such electrical equipment should be subject to multiple tests, including the reliability test, function test, protective action test, electromagnetic interference test, which mostly depend on the high-precision and high-performance programmable DC power supply. In the aerospace field, the programmable DC power supply is mainly used in testing of DC-DC power supply modules, batteries, flight simulators and other DC electrical equipment.

Product application articles

30-06-2017

Application of Built-in International Standard Voltage Curve of DC Power Supply in Automotive Electronic Industry

pdf 0.22MB

The complex output of the automotive power supply system, frequent fluctuations of the power voltage output caused by high-current motors, electromagnetic valves and other components and frequent high-voltage pulsation or drop result in challenges for stabling operation of automotive electronic products. The laboratory test is necessary to simulate the transient voltage of the actual power supply system in order to identify the reliability risks of automotive electronic products as soon as possible.

Product application articles

30-06-2017

High-speed Test without Overshoot

pdf 0.34MB

Generally speaking, CV and CC are two types of operation modes of DC power supplies. The two operation modes correspond to two internal loops (CV control loop and CC control loop). ...

Product application articles

30-06-2017

How to test inrush current?

pdf 0.21MB

Almost all of AC power equipment need power adapter, such as household appliance, office and computer equipment, AC/DC power adapter, etc. ITECH IT7600 series high performance programmable ac power sources can measure the inrush current easily and efficiently.

Product application articles

30-06-2017

How to test the MPPT function of inverter?

pdf 0.43MB

ITECH newly-launched high speed high performance photovoltaic / solar simulator power supply is another key product in the new energy testing field, which can perform high-performance solar panel output simulation and provide testing for solar inverters, photovoltaic controllers and micro-grid equipment.

Product application articles

30-06-2017

How to test the MPPT function of inverter?

pdf 0.43MB

ITECH newly-launched high speed high performance photovoltaic / solar simulator power supply is another key product in the new energy testing field, which can perform high-performance solar panel output simulation and provide testing for solar inverters, photovoltaic controllers and micro-grid equipment.

Product application articles

30-06-2017

Itech Programmable Battery/Charger Simulator Solutions

pdf 0.25MB

Itech has launched a new product IT6412 dual-channel bipolar programmable DC power source. It provides Battery function module, under this module, it can realize functions of bipolar forward current output and negative current input.

Product application articles

26-10-2015

Itech Portable Lithium Battery Safety Test Solutions

pdf 0.50MB

Itech IT6412 brings the latest lithium battery safety test solutions.

Product application articles

26-10-2015