Home > Quick Charger Controller Test Solution
Quick Charger Controller Test Solution  86-25-52415098    www.itechate.com
  • Test Solutions
  • Products
  • Test instrument: IT-E255A/M quick charger controller
    ITECH IT255A/M quick charger controller provides QC2.0, QC3.0, QC4.0, PE+, PE2.0+, USB PD2.0 and USB PD3.0/USB PPS 7 types of protocols for automatically or manually quick charger loading test. It can simulate the fast charge control signal of smartphone, tablet and notebook, which is suitable for the test of smartphone/tablet charger, AC-DC adapter, mobile power bank, car charger and wall charger.

    Test object
    ♦ Smartphone/tablet charger, AC-DC adapter
    ♦ Mobile power bank
    ♦ Car charger
    ♦ Wall charger


    Manual version IT-E255M
    IT-E255M is manual version with big LED screen, which can support IT8500+, IT8800, IT8700 electronic loads connection and simulate the loading of quick charger, provide a Micro USB and a USB Type C hardware interface for DUT connection.


    Automatic version IT-E255A
    IT-E255A is automatic version with big LED screen, which can connect to IT8500+ electronic load via TTL interface. It can be controlled by PC software via USB interface and be offline controlled whenever needed.


    IT-E255A Automatic Test
    IT-E255A controlled by PC software can fulfill all the functions of Quick charger controller and partial functions of e-load, including list, OCP/ OPP test and comparison.
    Programs can be written into the Quick charger controller, thus the Quick charger controller can do mass production test without the PC.

    1.Communication test, After plugging in the USB, open the device manager in the system, you should see the addition of USB Test and Measurement Device (IVI) and USB serial device, Or use the dedicated software USB Charger Software to confirm the communication success.
    2.Software can be connected via virtual serial port RS232 or USB.
    3.Users can select “list mode” to enter list multi-step automatic operation loading and judgment. Each step can carry out OCP and OPP test of charger.
    4.If you need to use it offline with PC, you can select write to download the program from the PC software to quick charger controller, and you can easily perform quick charger controller panel operation and automatic test.


    IT-E255A/M Manual Operation guide


     

  • Test instrument: IT-E255A/M quick charger controller
    ITECH IT255A/M quick charger controller provides QC2.0, QC3.0, QC4.0, PE+, PE2.0+, USB PD2.0 and USB PD3.0/USB PPS 7 types of protocols for automatically or manually quick charger loading test. It can simulate the fast charge control signal of smartphone, tablet and notebook, which is suitable for the test of smartphone/tablet charger, AC-DC adapter, mobile power bank, car charger and wall charger.

    Test object
    ♦ Smartphone/tablet charger, AC-DC adapter
    ♦ Mobile power bank
    ♦ Car charger
    ♦ Wall charger


    Manual version IT-E255M
    IT-E255M is manual version with big LED screen, which can support IT8500+, IT8800, IT8700 electronic loads connection and simulate the loading of quick charger, provide a Micro USB and a USB Type C hardware interface for DUT connection.


    Automatic version IT-E255A
    IT-E255A is automatic version with big LED screen, which can connect to IT8500+ electronic load via TTL interface. It can be controlled by PC software via USB interface and be offline controlled whenever needed.


    IT-E255A Automatic Test
    IT-E255A controlled by PC software can fulfill all the functions of Quick charger controller and partial functions of e-load, including list, OCP/ OPP test and comparison.
    Programs can be written into the Quick charger controller, thus the Quick charger controller can do mass production test without the PC.

    1.Communication test, After plugging in the USB, open the device manager in the system, you should see the addition of USB Test and Measurement Device (IVI) and USB serial device, Or use the dedicated software USB Charger Software to confirm the communication success.
    2.Software can be connected via virtual serial port RS232 or USB.
    3.Users can select “list mode” to enter list multi-step automatic operation loading and judgment. Each step can carry out OCP and OPP test of charger.
    4.If you need to use it offline with PC, you can select write to download the program from the PC software to quick charger controller, and you can easily perform quick charger controller panel operation and automatic test.


    IT-E255A/M Manual Operation guide